suse 10.3 winmodem

4 risposte [Ultimo messaggio]
Ritratto di Midall
Midall
(Junior)
Offline
Junior
Iscritto: 28/11/2006
Messaggi: 7

Ciao raga!!!!!!
La mia azienda mi ha dato un portatile, hp compaq 6710b, al quale ho subito installato una opensuse 10.3.
Tutto l’hw è stato trovato in fase di installazione ad esclusione del winmodem (ma questo lo immaginavo) e del fingerprint sensor.
Ebbene di quest’ultimo poco mi importa ma del modem ho la necessità che sia funzionante in quanto la mia abitazione non è raggiunta dall’adsl.
Capita giusto a fagiolo il numero di novembre di linux-magazine dove spiega come configurare questi maledetti winmodem, premetto che era già da qualche giorno che ci smanettavo.
Vi allegherò a questa mail diversi log nel caso abbiate tempo e voglia possiate darmi una soluzione a questa problematica…
In breve i passi che ho seguito:
1 - ho scaricato e lanciato l’utility scanmodem….. leggendo i vari txt ho visto che il mio chipset del modem è quello caricato dal module snd_hda_intel
2- per sicurezza ho fatto l’upgrade degli ultimi driver alsa all’ultima versione stabile, nello specifico ho installato, gli alsa-driver alsa-lib alsa-utils
2- lanciato il comando sldmodemd –c ITALY –alsa hw:0,6 viene creato il link simbolico al device
3- wvdialconf fa una find dei device è mi trova il modem .. edito il wvdial.conf inserendo i parametri suggerti dai vari txt generati dallo scanmodem e lancio wvdial –C /etc/wvdial.conf
Ebbene parte wvdial, io penso è fatta invece niente, dopo qualche minuto ricevo come errore un “NO CARRIER” , specifico che ho fatto delle prove inserendo anche il valore X3 alla stringa di INIT di wvdial.conf ma la situazione non cambia
Ebbene ora non so più dove sbattere la testa, sono nelle vostre mani, vi allego tutti i log che ho creato, oltre a voi non mi rimane che provare a sentire il team alsa visto che l’unica cosa che mi fa storcere il naso è questo errore:
ALSA /root/alsa-driver-1.0.15/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:576: hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x10490000
Raga sono nelle vostre mani!!!!

Ritratto di sunrots
sunrots
(Guru)
Offline
Guru
Iscritto: 04/01/2005
Messaggi: 510

Salve,
è possibile dare una occhiata al risultato dell'utility scanmodem?
Poi, come istruzione addizionale userei il comando completo ATX3 piuttosto che X3 semplicemente.
Saluti,

sunrots

Non più attivo qui. Mi troverete su http://it-opensuse.org Wink

Ritratto di Midall
Midall
(Junior)
Offline
Junior
Iscritto: 28/11/2006
Messaggi: 7

azz avevo allegato tutti i log in un zip ma ma sino accorto che il forum allega solo txt jpg gif png....
comunque anche mettento X3 nella stringa nulla cambia, glogglerando ho anche trovato un tipo che diceva di inserire AT davanti ad ogni stinga.. ma niente il risultato non cambia...
di seguito il risultato dello scanmodem.
Grazie per l'interessamento:
scanmodem.txt:
Only plain text email is forwarded by the Discuss@Linmodems.org List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry
Welcome to openSUSE 10.3 (i586) - Kernel kernel 2.6.22.5-31-default
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Your contry's local Linux experts
can be found through: http://www.linux.org/groups/index.html
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Welcome to openSUSE 10.3 (i586) - Kernel
Linux version 2.6.22.5-31-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/09/21 22:29:00 UTC
scanModem update of: 20071030
The modem symbolic link is /dev/modem -> /dev/ttySL0

There are no blacklisted modem drivers in /etc/modprobe* files

The Advanced Linux Sound Architecture (ALSA) packages providing audio support on your System,
also includes drivers for some modems. Diagnostics are under the /proc/asound/ folders.

For modems using the snd-hda-intel audio+modem driver, upgrades to
a new ALSA version are sometimes necessary to achieve function.
See for example:
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg02144.html.
Audio cards with the ALC883 chipset may require an upgrade to ALSA version 1.0.15 for modem support, see
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg02577.html

Copying ALSA diagnostics to Modem/ALSAroot.tgz
ALSAversion = 1.0.15

Summary card and chipset information is in:
/proc/asound/cards:
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xe4804000 irq 16

/proc/asound/pcm:
00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1
00-00: AD198x Analog : AD198x Analog : playback 1 : capture 1

USB modem not detected by lsusb

For candidate card, firmware information and bootup diagnostics are:

PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:284b 103c:30c0 Audio device: Intel Corporation 82801H

Modem interrupt assignment and sharing:
16: 4841 292 IO-APIC-fasteoi uhci_hcd:usb1, HDA Intel, yenta, i915@pci:0000:00:02.0
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1b.0 to 64

=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===

The High Defintion Audio card with PCI ID 8086:284b may host a soft modem chip.
---ALSA bootup diagnostics ---

The HDA modem codec file is: /proc/asound/card0/codec#1
-----------------------------------
Codec: Generic 11c1 Si3054
Address: 1
Vendor Id: 0x11c11040
Subsystem Id: 0x103c1378
Revision Id: 0x100200
Modem Function Group: 0x1

There is candidate modem software.

For candidate modem in PCI bus: 00:1b.0
Class 0403: 8086:284b Audio device: Intel Corporation 82801H
Primary PCI_id 8086:284b
Subsystem PCI_id 103c:30c0
Softmodem codec or chipset from diagnostics:
from Archives:

Lacking a dsp (digital signal processing) chip, the modem is a software
intensive or "softmodem" type. Its primary controller manages the traffic
with the CPU. But the software needed is specified in the Subsystem.
-----------------------------------------
Support type needed or chipset: slmodemd supporting the snd-hda-intel audio+modem driver

An ALSA (Advanced Linux Sound Architecture) modem driver: snd-hda-intel
provides Low Level support enabling contact with the modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility: slmodemd

Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.2.tar.gz having a compiled slmodemd. Unpack under Linux with:
$ tar zxf SLMODEMD.gcc4.2.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
slmodemd -c YOUR_COUNTRY --alsa hw:0,6
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.

Already loaded into the kernel is snd-hda-intel and audio drivers it depends on,
displayed by: lsmod | grep snd_hda_intel
Module Size Used by
-------------------------------------
snd_hda_intel 271520 1
snd_pcm 75780 2 snd_pcm_oss,snd_hda_intel
snd_page_alloc 14088 2 snd_hda_intel,snd_pcm
snd_hwdep 12932 1 snd_hda_intel
snd 54452 10 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_pcm,snd_timer,snd_hwdep

The diagnostic outputs for this softmodem section have their raw information in
folders and text files under /proc/asound/ which you can browse. The information
is from files:
/proc/asound/pcm
-------------------------------
00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1
00-00: AD198x Analog : AD198x Analog : playback 1 : capture 1

/proc/asound/modules
-------------------------------
0 snd_hda_intel
/proc/asound/card0/codec#1
-------------------------------

and from the command:
aplay -l | grep -i modem
card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem]

----------------end Softmodem section --------------

Writing Intel.txt
Writing Smartlink.txt
============ end Smartlink section =====================

Completed candidate modem analyses.

The base of the UDEV device file system is: /dev/.udev

Versions adequately match for the compiler installed: 4.2.1
and the compiler used in kernel assembly: 4.2.1

Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.2
linuc_headers base folder /lib/modules/2.6.22.5-31-default/build

However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu, linux-libc-dev). The also required headers of package libc6 are commonly installed by default.

If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed pacakage
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb

Checking pppd properties:
-rwxr-xr-x 1 root dialout 298784 Sep 22 01:41 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd

Checking settings of: /etc/ppp/options
noipdefault
noauth
crtscts
lock
modem
asyncmap 0
nodetach
lcp-echo-interval 30
lcp-echo-failure 4
lcp-max-configure 60
lcp-restart 2
idle 600
noipx
file /etc/ppp/filters

In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================

Checking for modem support lines:
--------------------------------------
/device/modem symbolic link: lrwxrwxrwx 1 root root 11 Nov 3 2007 /dev/modem -> /dev/ttySL0
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/50-udev-default.rules:KERNEL=="mwave", NAME="modems/%k", GROUP="uucp"
/etc/udev/rules.d/77-network.rules:SUBSYSTEM=="net", ENV{INTERFACE}=="ppp*|ippp*|isdn*|plip*|lo*|irda*|dummy*|ipsec*|tun*|tap*|bond*|vlan*|modem*|dsl*", GOTO="skip_ifup"
Within /etc/modprobe.conf files:
/etc/modprobe.conf:# Linux ACP modem (Mwave)
Within any ancient /etc/devfs files:

Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

Ritratto di sunrots
sunrots
(Guru)
Offline
Guru
Iscritto: 04/01/2005
Messaggi: 510

Forse le indicazioni contenute in questa discussione potrebbero essere utili:
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg02597.html
Inoltre, cosa danno come risultato i comandi da console ($ significa non da utente root):
$ lspci
$ lsmod | grep snd

Saluti,

sunrots

Non più attivo qui. Mi troverete su http://it-opensuse.org Wink

Ritratto di cracker87
cracker87
(Junior)
Offline
Junior
Iscritto: 22/11/2006
Messaggi: 28

Ciao... ma qual è il chipset del tuo modem? 8-)