come faccio ad installare sta benedetta webcam?!?!?!?!?

AIUTTTTTTOOOOOOOOO!!!! X FAVORE!!!!

$ dmesg
[ 0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Sep 23 19:50:39 UTC 2007 (Ubuntu 2.6.20-16.32-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fef0000 end: 000000001fff0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001fff0000 size: 0000000000003000 end: 000000001fff3000 type: 4
[ 0.000000] copy_e820_map() start: 000000001fff3000 size: 000000000000d000 end: 0000000020000000 type: 3
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f4d50
[ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131056
[ 0.000000] HighMem 131056 -> 131056
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131056
[ 0.000000] On node 0 totalpages: 131056
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125969 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 GBT ) @ 0x000f66e0
[ 0.000000] ACPI: RSDT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1fff3000
[ 0.000000] ACPI: FADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1fff3040
[ 0.000000] ACPI: MADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1fff77c0
[ 0.000000] ACPI: DSDT (v001 GBT AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:10 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[ 0.000000] Detected 2109.543 MHz processor.
[ 14.115257] Built 1 zonelists. Total pages: 130033
[ 14.115261] Kernel command line: root=UUID=478f0a7a-6b8b-4c34-b6d7-b14d290ddefc ro quiet splash
[ 14.115420] mapped APIC to ffffd000 (fee00000)
[ 14.115423] mapped IOAPIC to ffffc000 (fec00000)
[ 14.115426] Enabling fast FPU save and restore... done.
[ 14.115429] Enabling unmasked SIMD FPU exception support... done.
[ 14.115441] Initializing CPU#0
[ 14.115520] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 14.116430] Console: colour VGA+ 80x25
[ 14.116899] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 14.117216] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 14.131301] Memory: 508728k/524224k available (1993k kernel code, 14964k reserved, 900k data, 328k init, 0k highmem)
[ 14.131312] virtual kernel memory layout:
[ 14.131313] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 14.131314] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 14.131315] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 14.131316] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 14.131317] .init : 0xc03d9000 - 0xc042b000 ( 328 kB)
[ 14.131319] .data : 0xc02f2429 - 0xc03d36d4 ( 900 kB)
[ 14.131320] .text : 0xc0100000 - 0xc02f2429 (1993 kB)
[ 14.131323] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 14.207451] Calibrating delay using timer specific routine.. 4223.02 BogoMIPS (lpj=8446043)
[ 14.207495] Security Framework v1.0.0 initialized
[ 14.207502] SELinux: Disabled at boot.
[ 14.207519] Mount-cache hash table entries: 512
[ 14.207669] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[ 14.207678] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 14.207680] CPU: L2 Cache: 512K (64 bytes/line)
[ 14.207683] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[ 14.207694] Compat vDSO mapped to ffffe000.
[ 14.207699] Remapping vsyscall page to ffffe000
[ 14.207708] Checking 'hlt' instruction... OK.
[ 14.223560] SMP alternatives: switching to UP code
[ 14.223782] Freeing SMP alternatives: 11k freed
[ 14.223998] Early unpacking initramfs... done
[ 14.514906] ACPI: Core revision 20060707
[ 14.518578] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 14.521957] CPU0: AMD Athlon(tm) XP 3000+ stepping 00
[ 14.521984] Total of 1 processors activated (4223.02 BogoMIPS).
[ 14.522723] ENABLING IO-APIC IRQs
[ 14.523028] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 14.667123] Brought up 1 CPUs
[ 14.667393] Booting paravirtualized kernel on bare hardware
[ 14.667484] Time: 19:16:57 Date: 09/02/107
[ 14.667518] NET: Registered protocol family 16
[ 14.667616] EISA bus registered
[ 14.667621] ACPI: bus type pci registered
[ 14.674791] PCI: PCI BIOS revision 2.10 entry at 0xf9fd0, last bus=1
[ 14.674794] PCI: Using configuration type 1
[ 14.674795] Setting up standard PCI resources
[ 14.684883] ACPI: Interpreter enabled
[ 14.684890] ACPI: Using IOAPIC for interrupt routing
[ 14.685465] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 14.685469] PCI: Probing PCI hardware (bus 00)
[ 14.685945] PCI quirk: region 4000-407f claimed by vt8235 PM
[ 14.685949] PCI quirk: region 5000-500f claimed by vt8235 SMB
[ 14.686147] Boot video device is 0000:01:00.0
[ 14.686185] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 14.708802] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
[ 14.709101] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[ 14.709401] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
[ 14.709700] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *5
[ 14.709971] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 14.710232] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 14.710490] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 14.710749] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 14.711093] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
[ 14.711426] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
[ 14.711770] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
[ 14.712102] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
[ 14.714745] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 14.714756] pnp: PnP ACPI init
[ 14.718670] pnp: PnP ACPI: found 15 devices
[ 14.718675] PnPBIOS: Disabled by ACPI PNP
[ 14.718734] PCI: Using ACPI for IRQ routing
[ 14.718738] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 14.735184] NET: Registered protocol family 8
[ 14.735186] NET: Registered protocol family 20
[ 14.735506] pnp: 00:02: ioport range 0x4000-0x407f could not be reserved
[ 14.735509] pnp: 00:02: ioport range 0x40f0-0x40ff could not be reserved
[ 14.735512] pnp: 00:02: ioport range 0x5000-0x500f has been reserved
[ 14.735783] PCI: Bridge: 0000:00:01.0
[ 14.735786] IO window: c000-cfff
[ 14.735790] MEM window: e0000000-e1ffffff
[ 14.735794] PREFETCH window: d8000000-dfffffff
[ 14.735809] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 14.735839] NET: Registered protocol family 2
[ 14.767111] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 14.767212] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 14.767451] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 14.767563] TCP: Hash tables configured (established 16384 bind 8192)
[ 14.767566] TCP reno registered
[ 14.779112] checking if image is initramfs... it is
[ 15.328453] Freeing initrd memory: 6768k freed
[ 15.328978] audit: initializing netlink socket (disabled)
[ 15.328997] audit(1191352618.296:1): initialized
[ 15.329110] VFS: Disk quotas dquot_6.5.1
[ 15.329129] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 15.329182] io scheduler noop registered
[ 15.329185] io scheduler anticipatory registered
[ 15.329188] io scheduler deadline registered
[ 15.329194] io scheduler cfq registered (default)
[ 15.329456] isapnp: Scanning for PnP cards...
[ 15.682986] isapnp: No Plug & Play device found
[ 15.706745] Real Time Clock Driver v1.12ac
[ 15.706801] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 15.706919] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 15.707041] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 15.707544] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 15.707753] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 15.707955] mice: PS/2 mouse device common for all mice
[ 15.708561] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 15.708816] input: Macintosh mouse button emulation as /class/input/input0
[ 15.708849] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 15.708853] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 15.709095] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 15.710409] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 15.710415] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 15.710568] EISA: Probing bus 0 at eisa.0
[ 15.710590] Cannot allocate resource for EISA slot 4
[ 15.710592] Cannot allocate resource for EISA slot 5
[ 15.710605] EISA: Detected 0 cards.
[ 15.740681] TCP cubic registered
[ 15.740687] NET: Registered protocol family 1
[ 15.740711] Using IPI No-Shortcut mode
[ 15.740775] ACPI: (supports S0 S1 S4 S5)
[ 15.740823] Magic number: 11:907:292
[ 15.740856] hash matches device ttyz6
[ 15.741000] hash matches device tty25
[ 15.741480] Freeing unused kernel memory: 328k freed
[ 15.742183] Time: tsc clocksource has been installed.
[ 15.758075] input: AT Translated Set 2 keyboard as /class/input/input1
[ 16.947866] Capability LSM initialized
[ 17.488595] usbcore: registered new interface driver usbfs
[ 17.488622] usbcore: registered new interface driver hub
[ 17.488646] usbcore: registered new device driver usb
[ 17.489452] USB Universal Host Controller Interface driver v3.0
[ 17.489879] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
[ 17.489882] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[ 17.489894] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 17.489908] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 17.490099] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 17.490133] uhci_hcd 0000:00:10.0: irq 16, io base 0x0000d400
[ 17.490255] usb usb1: configuration #1 chosen from 1 choice
[ 17.490284] hub 1-0:1.0: USB hub found
[ 17.490295] hub 1-0:1.0: 2 ports detected
[ 17.546035] SCSI subsystem initialized
[ 17.550940] libata version 2.20 loaded.
[ 17.561097] via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
[ 17.592898] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 17.592913] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 17.592937] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 17.592961] uhci_hcd 0000:00:10.1: irq 16, io base 0x0000d800
[ 17.593083] usb usb2: configuration #1 chosen from 1 choice
[ 17.593108] hub 2-0:1.0: USB hub found
[ 17.593119] hub 2-0:1.0: 2 ports detected
[ 17.661569] Floppy drive(s): fd0 is 1.44M
[ 17.696823] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 17.696838] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 17.696864] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 17.696889] uhci_hcd 0000:00:10.2: irq 16, io base 0x0000dc00
[ 17.696997] usb usb3: configuration #1 chosen from 1 choice
[ 17.697024] hub 3-0:1.0: USB hub found
[ 17.697035] hub 3-0:1.0: 2 ports detected
[ 17.710515] FDC 0 is a post-1991 82077
[ 17.802388] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 17.802409] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 17.802463] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 17.802524] ehci_hcd 0000:00:10.3: irq 16, io mem 0xe2010000
[ 17.802530] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 17.802650] usb usb4: configuration #1 chosen from 1 choice
[ 17.802679] hub 4-0:1.0: USB hub found
[ 17.802692] hub 4-0:1.0: 6 ports detected
[ 17.906325] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
[ 17.906331] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[ 17.906341] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 17
[ 17.906430] eth0: VIA Rhine II at 0x1e800, 00:0f:ea:13:ed:11, IRQ 17.
[ 17.907139] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1.
[ 17.907343] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[ 17.907623] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[ 17.907626] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 17.907631] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 18
[ 17.907640] VP_IDE: chipset revision 6
[ 17.907643] VP_IDE: not 100% native mode: will probe irqs later
[ 17.907653] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[ 17.907661] ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
[ 17.907674] ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
[ 17.907682] Probing IDE interface ide0...
[ 18.324220] hda: Maxtor 6Y080L0, ATA DISK drive
[ 18.603991] hdb: MAXTOR 6L040J2, ATA DISK drive
[ 18.660452] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 18.667219] Probing IDE interface ide1...
[ 18.787768] usb 4-5: new high speed USB device using ehci_hcd and address 3
[ 18.920961] usb 4-5: configuration #1 chosen from 1 choice
[ 18.921292] hub 4-5:1.0: USB hub found
[ 18.921639] hub 4-5:1.0: 4 ports detected
[ 19.263380] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 19.459317] usb 2-1: configuration #1 chosen from 1 choice
[ 19.531256] hdc: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive
[ 19.663331] usb 4-5.1: new high speed USB device using ehci_hcd and address 4
[ 19.756330] usb 4-5.1: configuration #1 chosen from 1 choice
[ 19.756646] hub 4-5.1:1.0: USB hub found
[ 19.756995] hub 4-5.1:1.0: 4 ports detected
[ 20.058968] usb 4-5.1.3: new full speed USB device using ehci_hcd and address 5
[ 20.200932] usb 4-5.1.3: configuration #1 chosen from 1 choice
[ 20.314617] hdd: HL-DT-STDVD-ROM GDR8162B, ATAPI CD/DVD-ROM drive
[ 20.380093] ide1 at 0x170-0x177,0x376 on irq 15
[ 20.394150] hda: max request size: 128KiB
[ 20.398793] usb 4-5.1.4: new high speed USB device using ehci_hcd and address 6
[ 20.407714] hda: Host Protected Area detected.
[ 20.407717] current capacity is 160084415 sectors (81963 MB)
[ 20.407718] native capacity is 160086528 sectors (81964 MB)
[ 20.428904] hda: Host Protected Area disabled.
[ 20.428912] hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[ 20.429054] hda: cache flushes supported
[ 20.429112] hda: hda1 hda2
[ 20.451783] hdb: max request size: 128KiB
[ 20.451919] hdb: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(133)
[ 20.452052] hdb: cache flushes supported
[ 20.452069] hdb: hdb1 hdb2 hdb3 hdb4
[ 20.481322] hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 20.481333] Uniform CD-ROM driver Revision: 3.20
[ 20.507877] hdd: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33)
[ 20.737351] usb 4-5.1.4: configuration #1 chosen from 1 choice
[ 20.892271] Attempting manual resume
[ 20.892276] swsusp: Resume From Partition 3:66
[ 20.892277] PM: Checking swsusp image.
[ 20.892490] PM: Resume from disk failed.
[ 20.923668] kjournald starting. Commit interval 5 seconds
[ 20.923681] EXT3-fs: mounted filesystem with ordered data mode.
[ 29.814381] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 31.206008] NET: Registered protocol family 17
[ 31.799936] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 31.976713] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 32.166460] Linux agpgart interface v0.102 (c) Dave Jones
[ 32.170887] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[ 32.177664] agpgart: AGP aperture is 128M @ 0xd0000000
[ 32.406358] input: PC Speaker as /class/input/input2
[ 32.462261] irda_init()
[ 32.462291] NET: Registered protocol family 23
[ 32.541893] input: PS2++ Logitech MX Mouse as /class/input/input3
[ 32.854831] parport: PnPBIOS parport detected.
[ 32.854876] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 33.311864] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[ 33.311869] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 33.311878] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 19
[ 33.312220] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 33.320927] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3A02
[ 33.320947] usbcore: registered new interface driver usblp
[ 33.320951] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 33.375417] usbcore: registered new interface driver snd-usb-audio
[ 33.974705] fuse init (API version 7.8)
[ 34.013530] lp0: using parport0 (interrupt-driven).
[ 34.041544] Adding 996020k swap on /dev/disk/by-uuid/8e72e63f-0e31-497e-b994-d870eb52d30a. Priority:-1 extents:1 across:996020k
[ 34.282788] EXT3 FS on hdb3, internal journal
[ 43.286003] ReiserFS: hdb1: found reiserfs format "3.6" with standard journal
[ 43.286015] ReiserFS: hdb1: using ordered data mode
[ 43.286310] ReiserFS: hdb1: journal params: device hdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 43.287469] ReiserFS: hdb1: checking transaction log (hdb1)
[ 43.307505] ReiserFS: hdb1: Using r5 hash to sort names
[ 43.335188] kjournald starting. Commit interval 5 seconds
[ 43.335473] EXT3 FS on hdb4, internal journal
[ 43.335478] EXT3-fs: mounted filesystem with ordered data mode.
[ 43.358096] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 43.426723] NTFS volume version 3.1.
[ 49.962479] Using specific hotkey driver
[ 50.060861] No dock devices found.
[ 50.101929] ibm_acpi: ec object not found
[ 50.240330] input: Power Button (FF) as /class/input/input4
[ 50.245201] ACPI: Power Button (FF) [PWRF]
[ 50.277334] input: Power Button (CM) as /class/input/input5
[ 50.282053] ACPI: Power Button (CM) [PWRB]
[ 50.314039] pcc_acpi: loading...
[ 52.429126] ppdev: user-space parallel port driver
[ 53.021783] [drm] Initialized drm 1.1.0 20060810
[ 53.046183] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 53.049191] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 55.034743] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 55.034881] agpgart: Device is in legacy mode, falling back to 2.x
[ 55.034985] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 55.035026] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 55.142076] Bluetooth: Core ver 2.11
[ 55.142146] NET: Registered protocol family 31
[ 55.142148] Bluetooth: HCI device and connection manager initialized
[ 55.142152] Bluetooth: HCI socket layer initialized
[ 55.167322] Bluetooth: L2CAP ver 2.8
[ 55.167328] Bluetooth: L2CAP socket layer initialized
[ 55.330042] [drm] Setting GART location based on new memory map
[ 55.330052] [drm] Loading R200 Microcode
[ 55.330087] [drm] writeback test succeeded in 1 usecs
[ 55.540010] Bluetooth: RFCOMM socket layer initialized
[ 55.540029] Bluetooth: RFCOMM TTY layer initialized
[ 55.540031] Bluetooth: RFCOMM ver 1.8
[ 55.985751] usb 4-5.1.4:1.0: resuming
[ 55.986006] usb 4-5.1.4:1.0: resuming
[ 55.986285] usb 2-1:1.0: resuming
[ 55.986404] usb 2-1:1.0: resuming
[ 77.602551] NET: Registered protocol family 4
[ 77.699396] NET: Registered protocol family 3
[ 77.829438] NET: Registered protocol family 5
[ 2962.365209] eth0: link down
[ 2976.295508] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 3179.266772] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 3179.286168] ISOFS: changing to secondary root
[13852.784695] TCP: Treason uncloaked! Peer 137.104.225.41:11047/44542 shrinks window 539778227:539778235. Repaired.
[17731.973644] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[17732.310401] uhci_hcd 0000:00:10.2: remove, state 4
[17732.310409] usb usb3: USB disconnect, address 1
[17732.310595] uhci_hcd 0000:00:10.2: USB bus 3 deregistered
[17732.310632] ACPI: PCI interrupt for device 0000:00:10.2 disabled
[17732.310641] uhci_hcd 0000:00:10.1: remove, state 1
[17732.310645] usb usb2: USB disconnect, address 1
[17732.310647] usb 2-1: USB disconnect, address 2
[17732.311050] uhci_hcd 0000:00:10.1: USB bus 2 deregistered
[17732.311071] ACPI: PCI interrupt for device 0000:00:10.1 disabled
[17732.311079] uhci_hcd 0000:00:10.0: remove, state 4
[17732.311082] usb usb1: USB disconnect, address 1
[17732.311193] uhci_hcd 0000:00:10.0: USB bus 1 deregistered
[17732.311213] ACPI: PCI interrupt for device 0000:00:10.0 disabled
[17734.039127] PM: suspend-to-disk mode set to 'platform'
[17735.947316] Disabling non-boot CPUs ...
[17735.947359] Stopping tasks ... done.
[17736.147658] Shrinking memory... done (61494 pages freed)
[17738.607161] Freed 245976 kbytes in 2.46 seconds (99.99 MB/s)
[17738.607198] Suspending console(s)
[17738.607235] platform bluetooth: freeze
[17738.607245] ac97 0-0:ALC655: freeze
[17738.607253] usbdev4.6_ep83: PM: suspend 0->1, parent 4-5.1.4:1.0 already 2
[17738.607256] usbdev4.6_ep02: PM: suspend 0->1, parent 4-5.1.4:1.0 already 2
[17738.607259] usbdev4.6_ep81: PM: suspend 0->1, parent 4-5.1.4:1.0 already 2
[17738.607262] usb 4-5.1.4:1.0: PM: suspend 2-->1
[17738.607264] usb 4-5.1.4:1.0: PM: suspend 2->1, parent 4-5.1.4 already 2
[17738.607266] usbdev4.6_ep00: PM: suspend 0->1, parent 4-5.1.4 already 2
[17738.607269] usb 4-5.1.4: PM: suspend 2-->1
[17738.607271] ide-cdrom 1.1: freeze
[17738.607284] ide-cdrom 1.0: freeze
[17738.608867] usblp 4-5.1.3:1.0: freeze
[17738.608870] usb 4-5.1.3: freeze
[17738.625576] hub 4-5.1:1.0: freeze
[17738.625579] usb 4-5.1: freeze
[17738.641561] hub 4-5:1.0: freeze
[17738.641564] usb 4-5: freeze
[17738.657548] ide-disk 0.1: freeze
[17739.344375] ide-disk 0.0: freeze
[17739.346078] hub 4-0:1.0: freeze
[17739.346082] usb usb4: freeze
[17739.346104] platform floppy.0: freeze
[17739.346107] platform vesafb.0: freeze
[17739.346111] platform eisa.0: freeze
[17739.346114] i8042 i8042: freeze
[17740.219400] serial8250 serial8250: freeze
[17740.219716] pcspkr pcspkr: freeze
[17740.219727] pnp 00:0e: freeze
[17740.219729] i8042 kbd 00:0d: freeze
[17740.219732] i8042 aux 00:0c: freeze
[17740.219734] parport_pc 00:0b: freeze
[17740.219917] pnp: Device 00:0b disabled.
[17740.219919] serial 00:0a: freeze
[17740.220086] pnp: Device 00:0a disabled.
[17740.220088] serial 00:09: freeze
[17740.220252] pnp: Device 00:09 disabled.
[17740.220254] pnp 00:08: freeze
[17740.220256] pnp 00:07: freeze
[17740.220257] pnp 00:06: freeze
[17740.220259] pnp 00:05: freeze
[17740.220261] pnp 00:04: freeze
[17740.220263] system 00:03: freeze
[17740.220264] system 00:02: freeze
[17740.220266] pnp 00:01: freeze
[17740.220268] system 00:00: freeze
[17740.220270] pci 0000:01:00.0: freeze
[17740.220303] via-rhine 0000:00:12.0: freeze
[17740.220346] VIA 82xx Audio 0000:00:11.5: freeze
[17740.220931] ACPI: PCI interrupt for device 0000:00:11.5 disabled
[17740.236277] VIA_IDE 0000:00:11.1: freeze
[17740.236307] pci 0000:00:11.0: freeze
[17740.236337] ehci_hcd 0000:00:10.3: freeze
[17740.236370] ACPI: PCI interrupt for device 0000:00:10.3 disabled
[17740.252272] pci 0000:00:10.2: freeze
[17740.252299] pci 0000:00:10.1: freeze
[17740.252327] pci 0000:00:10.0: freeze
[17740.252354] pci 0000:00:0c.0: freeze
[17740.252380] pci 0000:00:01.0: freeze
[17740.252403] agpgart-via 0000:00:00.0: freeze
[17740.252432] pci_set_power_state(): 0000:00:00.0: state=3, current state=5
[17740.252435] acpi acpi: freeze
[17740.252450] PM: snapshotting memory.
[17740.252453] platform bluetooth: LATE freeze
[17740.252465] platform floppy.0: LATE freeze
[17740.252467] platform vesafb.0: LATE freeze
[17740.252468] platform eisa.0: LATE freeze
[17740.252470] i8042 i8042: LATE freeze
[17740.252472] serial8250 serial8250: LATE freeze
[17740.252492] pcspkr pcspkr: LATE freeze
[17740.252494] pci 0000:01:00.0: LATE freeze
[17740.252496] via-rhine 0000:00:12.0: LATE freeze
[17740.252498] VIA 82xx Audio 0000:00:11.5: LATE freeze
[17740.252499] VIA_IDE 0000:00:11.1: LATE freeze
[17740.252501] pci 0000:00:11.0: LATE freeze
[17740.252503] pci 0000:00:10.2: LATE freeze
[17740.252504] pci 0000:00:10.1: LATE freeze
[17740.252506] pci 0000:00:10.0: LATE freeze
[17740.252507] pci 0000:00:0c.0: LATE freeze
[17740.252509] pci 0000:00:01.0: LATE freeze
[17740.252511] agpgart-via 0000:00:00.0: LATE freeze
[17740.252826] swsusp: critical section:
[17740.271949] swsusp: Need to copy 61579 pages
[17740.271953] swsusp: Normal pages needed: 61579 + 1024 + 14, available pages: 69475
[ 30.676181] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[ 30.676482] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
[ 30.676832] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[ 30.677134] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
[ 30.677139] agpgart-via 0000:00:00.0: EARLY resume
[ 30.677143] pci 0000:00:01.0: EARLY resume
[ 30.677145] pci 0000:00:0c.0: EARLY resume
[ 30.677147] pci 0000:00:10.0: EARLY resume
[ 30.677149] pci 0000:00:10.1: EARLY resume
[ 30.677151] pci 0000:00:10.2: EARLY resume
[ 30.677153] ehci_hcd 0000:00:10.3: EARLY resume
[ 30.677155] pci 0000:00:11.0: EARLY resume
[ 30.677157] VIA_IDE 0000:00:11.1: EARLY resume
[ 30.677160] VIA 82xx Audio 0000:00:11.5: EARLY resume
[ 30.677162] via-rhine 0000:00:12.0: EARLY resume
[ 30.677164] pci 0000:01:00.0: EARLY resume
[ 30.677170] pcspkr pcspkr: EARLY resume
[ 30.677235] serial8250 serial8250: EARLY resume
[ 30.677237] i8042 i8042: EARLY resume
[ 30.677239] platform eisa.0: EARLY resume
[ 30.677241] platform vesafb.0: EARLY resume
[ 30.677243] platform floppy.0: EARLY resume
[ 30.677254] platform bluetooth: EARLY resume
[ 30.870939] PM: Image restored successfully.
[ 30.881632] acpi acpi: resuming
[ 30.881648] agpgart-via 0000:00:00.0: resuming
[ 30.881678] PM: Writing back config space on device 0000:00:00.0 at offset 1 (was 22300006, writing a2300006)
[ 30.881694] pci 0000:00:01.0: resuming
[ 30.881724] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 30.881727] pci 0000:00:0c.0: resuming
[ 30.881750] pci 0000:00:10.0: resuming
[ 30.881767] PM: Writing back config space on device 0000:00:10.0 at offset 1 (was 2100007, writing 2100003)
[ 30.881777] pci 0000:00:10.1: resuming
[ 30.881794] PM: Writing back config space on device 0000:00:10.1 at offset 1 (was 2100007, writing 2100003)
[ 30.881804] pci 0000:00:10.2: resuming
[ 30.881821] PM: Writing back config space on device 0000:00:10.2 at offset 1 (was 2100007, writing 2100003)
[ 30.881833] ehci_hcd 0000:00:10.3: resuming
[ 30.898047] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 30.898077] usb usb4: root hub lost power or was reset
[ 30.898091] pci 0000:00:11.0: resuming
[ 30.898125] VIA_IDE 0000:00:11.1: resuming
[ 30.898157] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 18
[ 30.898161] VIA 82xx Audio 0000:00:11.5: resuming
[ 30.914050] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 19
[ 30.914056] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 30.917199] via-rhine 0000:00:12.0: resuming
[ 30.917844] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 30.917853] pci 0000:01:00.0: resuming
[ 30.917884] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 30.917888] system 00:00: resuming
[ 30.917890] pnp 00:01: resuming
[ 30.917892] system 00:02: resuming
[ 30.917893] system 00:03: resuming
[ 30.917895] pnp 00:04: resuming
[ 30.917897] pnp 00:05: resuming
[ 30.917899] pnp 00:06: resuming
[ 30.917900] pnp 00:07: resuming
[ 30.917902] pnp 00:08: resuming
[ 30.917904] serial 00:09: resuming
[ 30.918742] pnp: Device 00:09 activated.
[ 30.918746] serial 00:0a: resuming
[ 30.919485] pnp: Device 00:0a activated.
[ 30.919488] parport_pc 00:0b: resuming
[ 30.920291] pnp: Device 00:0b activated.
[ 30.920294] i8042 aux 00:0c: resuming
[ 30.920435] pnp: Failed to activate device 00:0c.
[ 30.920438] i8042 kbd 00:0d: resuming
[ 30.920447] pnp: Failed to activate device 00:0d.
[ 30.920449] pnp 00:0e: resuming
[ 30.920456] pcspkr pcspkr: resuming
[ 30.920698] serial8250 serial8250: resuming
[ 30.920706] i8042 i8042: resuming
[ 30.920730] atkbd serio0: resuming
[ 30.958645] platform eisa.0: resuming
[ 30.958649] psmouse serio1: resuming
[ 31.249471] platform vesafb.0: resuming
[ 31.249473] platform floppy.0: resuming
[ 31.249475] usb usb4: resuming
[ 31.281731] hub 4-0:1.0: resuming
[ 31.281734] ide-disk 0.0: resuming
[ 31.286504] ide-disk 0.1: resuming
[ 31.289585] usb 4-5: resuming
[ 31.289588] usbdev4.3_ep00: PM: resume from 0, parent 4-5 still 1
[ 31.289591] hub 4-5:1.0: PM: resume from 1, parent 4-5 still 1
[ 31.289593] hub 4-5:1.0: resuming
[ 31.289594] usbdev4.3_ep81: PM: resume from 0, parent 4-5:1.0 still 1
[ 31.289597] usb 4-5.1: PM: resume from 1, parent 4-5 still 1
[ 31.289599] usb 4-5.1: resuming
[ 31.289601] usbdev4.4_ep00: PM: resume from 0, parent 4-5.1 still 1
[ 31.289603] hub 4-5.1:1.0: PM: resume from 1, parent 4-5.1 still 1
[ 31.289605] hub 4-5.1:1.0: resuming
[ 31.289607] usbdev4.4_ep81: PM: resume from 0, parent 4-5.1:1.0 still 1
[ 31.289610] usb 4-5.1.3: PM: resume from 1, parent 4-5.1 still 1
[ 31.289611] usb 4-5.1.3: resuming
[ 31.289613] usbdev4.5_ep00: PM: resume from 0, parent 4-5.1.3 still 1
[ 31.289617] usblp 4-5.1.3:1.0: PM: resume from 1, parent 4-5.1.3 still 1
[ 31.289618] usblp 4-5.1.3:1.0: resuming
[ 31.289620] ide-cdrom 1.0: resuming
[ 31.294670] ide-cdrom 1.1: resuming
[ 31.304280] usbdev4.6_ep00: PM: resume from 0, parent 4-5.1.4 still 2
[ 31.304284] usbdev4.6_ep81: PM: resume from 0, parent 4-5.1.4:1.0 still 2
[ 31.304286] usbdev4.6_ep02: PM: resume from 0, parent 4-5.1.4:1.0 still 2
[ 31.304289] usbdev4.6_ep83: PM: resume from 0, parent 4-5.1.4:1.0 still 2
[ 31.304295] usbdev4.5_ep81: PM: resume from 0, parent 4-5.1.3:1.0 still 1
[ 31.304297] usbdev4.5_ep02: PM: resume from 0, parent 4-5.1.3:1.0 still 1
[ 31.304303] ac97 0-0:ALC655: resuming
[ 31.304312] platform bluetooth: resuming
[ 31.534164] Restarting tasks ... done.
[ 31.548556] Enabling non-boot CPUs ...
[ 31.729601] usb 4-5: USB disconnect, address 3
[ 31.729607] usb 4-5.1: USB disconnect, address 4
[ 31.729610] usb 4-5.1.3: USB disconnect, address 5
[ 31.730465] drivers/usb/class/usblp.c: usblp0: removed
[ 31.730555] usb 4-5.1.4: USB disconnect, address 6
[ 31.969186] usb 4-5: new high speed USB device using ehci_hcd and address 8
[ 32.102332] usb 4-5: configuration #1 chosen from 1 choice
[ 32.102641] hub 4-5:1.0: USB hub found
[ 32.102865] hub 4-5:1.0: 4 ports detected
[ 32.405100] usb 4-5.1: new high speed USB device using ehci_hcd and address 9
[ 32.498100] usb 4-5.1: configuration #1 chosen from 1 choice
[ 32.498408] hub 4-5.1:1.0: USB hub found
[ 32.498754] hub 4-5.1:1.0: 4 ports detected
[ 32.800736] usb 4-5.1.3: new full speed USB device using ehci_hcd and address 10
[ 32.942203] usb 4-5.1.3: configuration #1 chosen from 1 choice
[ 32.948023] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 10 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3A02
[ 33.148542] usb 4-5.1.4: new high speed USB device using ehci_hcd and address 11
[ 33.483100] usb 4-5.1.4: configuration #1 chosen from 1 choice
[ 38.244426] USB Universal Host Controller Interface driver v3.0
[ 38.244506] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 38.244520] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 38.244556] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 38.244581] uhci_hcd 0000:00:10.0: irq 16, io base 0x0000d400
[ 38.244712] usb usb1: configuration #1 chosen from 1 choice
[ 38.244743] hub 1-0:1.0: USB hub found
[ 38.244751] hub 1-0:1.0: 2 ports detected
[ 38.348205] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 38.348222] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 38.348249] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 38.348273] uhci_hcd 0000:00:10.1: irq 16, io base 0x0000d800
[ 38.348389] usb usb2: configuration #1 chosen from 1 choice
[ 38.348418] hub 2-0:1.0: USB hub found
[ 38.348429] hub 2-0:1.0: 2 ports detected
[ 38.452129] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 38.452147] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 38.452175] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 38.452199] uhci_hcd 0000:00:10.2: irq 16, io base 0x0000dc00
[ 38.452317] usb usb3: configuration #1 chosen from 1 choice
[ 38.452349] hub 3-0:1.0: USB hub found
[ 38.452360] hub 3-0:1.0: 2 ports detected
[ 38.843665] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 39.039734] usb 2-1: configuration #1 chosen from 1 choice
[ 39.105260] NTFS volume version 3.1.
[ 40.167243] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 40.167345] agpgart: Device is in legacy mode, falling back to 2.x
[ 40.167414] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 40.167454] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 40.167464] [drm] Loading R200 Microcode
[ 41.227461] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 2523.844813] Linux video capture interface: v2.00
[ 2523.855582] usbcore: registered new interface driver ov511
[ 2523.855667] ubuntu/media/ov511/ov511.c: v1.64 for Linux 2.5 : ov511 USB Camera Driver