Home Forums Suse Modem Ancora problemi eciadsl-usermode

Ancora problemi eciadsl-usermode

Login o registrati per inviare commenti
2 risposte [Ultimo messaggio]
Gio, 16/11/2006 - 01:00
Ritratto di nero84
nero84
(Newbie)
Offline
Newbie
Iscritto: 16/11/2006
Messaggi: 3

Buonasera a tutti.
Sono nuovo del forum e soprattutto di Linux (e quindi di Suse)

Ho scaricato ed installato l'ultima versione di SUse Linux,e navigando su internet ho trovato i suddetti driver per il mio winmodem globespan

Dopo tanta fatica sono riuscito ad installarli ed ho configurato il modem attraverso eciadsl-config-tk (per tutto questo devo ringraziare questo forum)

Purtroppo una volta lanciato eciadsl-start non riesco a connettermi (la sincronizzazione viene eseguita alla perfezione ma si blocca al passaggio successivo)

Inserisco il log dle comando Start

nb: nel file è presente il log del comando start lanciato da root, e quello di eciadsl-doctor lanciato però da utente normale

Grazie a chiunque perda tempo a leggerlo!!

In cima
Gio, 16/11/2006 - 10:08
#1
Ritratto di nero84
nero84
(Newbie)
Offline
Newbie
Iscritto: 16/11/2006
Messaggi: 3

Mi sembra però che il log non sia stato caricato..magari oggi quando torno a casa provo a rimetterlo

In cima
Gio, 16/11/2006 - 15:26
#2
Ritratto di nero84
nero84
(Newbie)
Offline
Newbie
Iscritto: 16/11/2006
Messaggi: 3

Ecco il log, lo inserisco come testo invece che come file:

[EciAdsl 1/5] Setting up USB support...

Preliminary USB device filesystem is missing... trying to mount

[EciAdsl 2/5] Uploading firmware...

GlobeSpan GS7070 USB ADSL WAN Modem compatible modem found (in 2158ms)
eciadsl-firmware: success
firmware loaded successfully

[EciAdsl 3/5] Synchronization...

OK eciadsl-synch: success
Synchronization successful

[EciAdsl 4/5] Connecting to provider...

Couldn't set tty to PPP discipline: Interrupted system call

(dopo un po che tenta di connettersi lo disattivo tramite ctrl+c)
NB: la sincronizzazione viene eseguita molto lentamente
Se provo a ridare il comando eciadsl-start:

[EciAdsl 1/5] Setting up USB support...

Preliminary USB device filesystem is OK

[EciAdsl 2/5] Uploading firmware...

Warning: firmware seems to be already loaded
Check that your modem is OFF before running eciadsl-start (if modem is
powered on, then unplug/replug it)

[EciAdsl 3/5] Synchronization...

OK eciadsl-synch: success
Synchronization successful

[EciAdsl 4/5] Connecting to provider...

using channel 1
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0x1 <magic 0xf0faca3e>]
sent [LCP ConfReq id=0x1 <magic 0xf0faca3e>]
sent [LCP ConfReq id=0x1 <magic 0xf0faca3e>]
sent [LCP ConfReq id=0x1 <magic 0xf0faca3e>]
Modem hangup
Connection terminated.
Script /usr/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x0002 -mode LLC_RFC2364 finished (pid 4497), status = 0x0
using channel 2
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0x2 <magic 0x6999ec8e>]
sent [LCP ConfReq id=0x2 <magic 0x6999ec8e>]
Script /usr/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x0002 -mode LLC_RFC2364 finished (pid 4506), status = 0x0
Modem hangup
Connection terminated.
using channel 3
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0x3 <magic 0x6f59a4a7>]
sent [LCP ConfReq id=0x3 <magic 0x6f59a4a7>]
Modem hangup
Connection terminated.
Script /usr/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x0002 -mode LLC_RFC2364 finished (pid 4515), status = 0x0
using channel 4
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0x4 <magic 0xd3f09142>]
sent [LCP ConfReq id=0x4 <magic 0xd3f09142>]
Modem hangup
Connection terminated.
Script /usr/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x0002 -mode LLC_RFC2364 finished (pid 4524), status = 0x0
using channel 5
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0x5 <magic 0xc10ae972>]
sent [LCP ConfReq id=0x5 <magic 0xc10ae972>]
Modem hangup
Connection terminated.
Script /usr/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x0002 -mode LLC_RFC2364 finished (pid 4533), status = 0x0
using channel 6
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0x6 <magic 0x91606ddc>]
sent [LCP ConfReq id=0x6 <magic 0x91606ddc>]
Modem hangup
Connection terminated.
Script /usr/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x0002 -mode LLC_RFC2364 finished (pid 4542), status = 0x0
using channel 7
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0x7 <magic 0xa300032>]
sent [LCP ConfReq id=0x7 <magic 0xa300032>]
Modem hangup
Connection terminated.
Script /usr/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x0002 -mode LLC_RFC2364 finished (pid 4572), status = 0x0
using channel 8
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0x8 <magic 0x965ce26>]
sent [LCP ConfReq id=0x8 <magic 0x965ce26>]
Modem hangup
Connection terminated.
Script /usr/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x0002 -mode LLC_RFC2364 finished (pid 4581), status = 0x0
using channel 9
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0x9 <magic 0x1d36fec5>]
sent [LCP ConfReq id=0x9 <magic 0x1d36fec5>]
Modem hangup
Connection terminated.
Script /usr/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x0002 -mode LLC_RFC2364 finished (pid 4590), status = 0x0
using channel 10
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0xa <magic 0x90de329>]
sent [LCP ConfReq id=0xa <magic 0x90de329>]
Modem hangup
Connection terminated.
Script /usr/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x0002 -mode LLC_RFC2364 finished (pid 4599), status = 0x0
ERROR: failed to connect

Log del Doctor

You are using linux kernel version 2.6.16.21-0.25-smp
Support for USB is OK
Preliminary USB device filesystem is OK
dabusb module is not loaded: OK
UHCI support is OK
OHCI support is not needed
/dev/ppp is OK
HDLC support is OK
HDLC support is OK (no bug)
You are using pppd version 2.4.3 (untested)
You have an /etc/ppp/options file. Options in this file may conflict with
options from /etc/ppp/peers/adsl. We suggest to remove this file or make a
backup copy.
No existing PPP connection... trying to make one (please wait)
using channel 11
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0x1 <magic 0x479de887>]
sent [LCP ConfReq id=0x1 <magic 0x479de887>]
Modem hangup
Connection terminated.
Script /usr/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x0002 -mode LLC_RFC2364 finished (pid 4680), status = 0x0
using channel 12
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0x2 <magic 0x138f67a3>]
sent [LCP ConfReq id=0x2 <magic 0x138f67a3>]
Modem hangup
Connection terminated.
Script /usr/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x0002 -mode LLC_RFC2364 finished (pid 4689), status = 0x0
using channel 13
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0x3 <magic 0x6cfea98>]
sent [LCP ConfReq id=0x3 <magic 0x6cfea98>]
Modem hangup
Connection terminated.
Script /usr/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x0002 -mode LLC_RFC2364 finished (pid 4698), status = 0x0
using channel 14
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0x4 <magic 0xc4ededf>]
sent [LCP ConfReq id=0x4 <magic 0xc4ededf>]
Modem hangup
Connection terminated.
Script /usr/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x0002 -mode LLC_RFC2364 finished (pid 4707), status = 0x0
using channel 15
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0x5 <magic 0x2da9034b>]
sent [LCP ConfReq id=0x5 <magic 0x2da9034b>]
Modem hangup
Connection terminated.
Script /usr/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x0002 -mode LLC_RFC2364 finished (pid 4716), status = 0x0
using channel 16
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0x6 <magic 0xddf66541>]
sent [LCP ConfReq id=0x6 <magic 0xddf66541>]
Modem hangup
Connection terminated.
Script /usr/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x0002 -mode LLC_RFC2364 finished (pid 4725), status = 0x0
using channel 17
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0x7 <magic 0x96b1433>]
sent [LCP ConfReq id=0x7 <magic 0x96b1433>]
Modem hangup
Connection terminated.
Script /usr/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x0002 -mode LLC_RFC2364 finished (pid 4734), status = 0x0
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0x8 <magic 0x18723893>]
sent [LCP ConfReq id=0x8 <magic 0x18723893>]
Modem hangup
Connection terminated.
Script /usr/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x0002 -mode LLC_RFC2364 finished (pid 4743), status = 0x0
using channel 19
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0x9 <magic 0x4f9a3d2e>]
sent [LCP ConfReq id=0x9 <magic 0x4f9a3d2e>]
Modem hangup
Connection terminated.
Script /usr/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x0002 -mode LLC_RFC2364 finished (pid 4753), status = 0x0
using channel 20
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0xa <magic 0x3e2dcbde>]
sent [LCP ConfReq id=0xa <magic 0x3e2dcbde>]
Modem hangup
Connection terminated.
Script /usr/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x0002 -mode LLC_RFC2364 finished (pid 4762), status = 0x0
PPP: very bad ... usermode driver just crashed

In cima
Login o registrati per inviare commenti
‹ Previous topic: Modem Libero Next topic: Modem ›