USRobotics 56k

3 risposte [Ultimo messaggio]
Ritratto di enrico79
enrico79
(Geek)
Offline
Geek
Iscritto: 16/10/2006
Messaggi: 152

Questo sarà il mio futuro modem usb in attesa dell'adsl (forse)

Bus 003 Device 002: ID 0baf:6112 U.S. Robotics FaxModem Model 5633
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
idVendor 0x0baf U.S. Robotics
idProduct 0x6112 FaxModem Model 5633
bcdDevice 0.01
iManufacturer 1 U.S. Robotics
iProduct 2 U.S. Robotics 56K Faxmodem USB
iSerial 3 USBHCF00000006
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 74
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4 Configuration for HCF modem
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 150mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 8
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 5 DDP/SSD Scratchpad interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)

aspetto suggerimenti di come configurarlo
:-o :-o :-o

Ritratto di auris
auris
(Guru)
Offline
Guru
Iscritto: 10/09/2004
Messaggi: 4923

Prova ad impartire questo comando da root:
wvdialconf /etc/wvdial.conf
Posta l'output.

Se sei stanco di virus e schermate blu passa a Linux

Ritratto di enrico79
enrico79
(Geek)
Offline
Geek
Iscritto: 16/10/2006
Messaggi: 152

linux:/home/enrico # wvdialconf /etc/wvdial.conf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S2 S3
ttyS4<Info>: No such device or address
Modem Port Scan<*1>: S4
ttyS5<Info>: No such device or address
Modem Port Scan<*1>: S5
ttyS6<Info>: No such device or address
Modem Port Scan<*1>: S6
ttyS7<Info>: No such device or address
Modem Port Scan<*1>: S7

Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?

Please read the FAQ at http://open.nit.ca/wiki/?WvDial

If you still have problems, send mail to <wvdial-list@lists.nit.ca>.

Ritratto di auris
auris
(Guru)
Offline
Guru
Iscritto: 10/09/2004
Messaggi: 4923

Ecco i driver: http://www.linuxant.com/drivers/hsf/full/downloads-suse-x86.php
Richiede che venga installato prima questo pacchetto:
http://www.linuxant.com/alsa-driver/alsa-driver-linuxant-1.0.18.0-1.noarch.rpm.zip
Per sfruttare la piena velocità del modem dovrai acquistare i driver.

Se sei stanco di virus e schermate blu passa a Linux